Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles User Manual download pdf (Page 4)

TNC Model, Software and Features

Software options

The TNC features various software options that can be enabled by

your machine tool builder. Each option is to be enabled separately and

contains the following respective functions:

Feature content level (upgrade functions)

Along with software options, significant further improvements of the

TNC software are managed via the Feature Content Level upgrade

functions. Functions subject to the FCL are not available simply by

updating the software on your TNC.

Upgrade functions are identified in the manual with FCL n, where n

indicates the sequential number of the feature content level.

You can purchase a code number in order to permanently enable the

FCL functions. For more information, contact your machine tool

builder or HEIDENHAIN.

Intended place of operation

The TNC complies with the limits for a Class A device in accordance

with the specifications in EN 55022, and is intended for use primarily

in industrially-zoned areas.

Software option 1

Cylinder surface interpolation (Cycles 27, 28 and 39)

Feed rate in mm/min on rotary axes: M116

Tilting the machining plane (Cycle 19 and 3-D ROT soft key in the

manual operating mode)

Circle in 3 axes with tilted working plane

All upgrade functions are available to you without

surcharge when you receive a new machine.

1 2 3 4 5 6 7 8 9 ... 164 165

No comments

Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles User Manual Page 4