Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles User Manual download pdf (Page 35)

HEIDENHAIN TNC 320 35

2.4 Setting the Datum with a 3-D Touch Probe

Corner as datum

8 Select the probe function by pressing the PROBING P

soft key.

8 Position the touch probe near the first touch point on

the same side of the workpiece.

8 Select the probe direction by soft key.

8 To probe the workpiece, press the machine START

button.

8 Position the touch probe near the second touch point

on the same side.

8 To probe the workpiece, press the machine START

button.

8 Position the touch probe near the first touch point on

the second side of the workpiece.

8 Select the probe direction by soft key.

8 To probe the workpiece, press the machine START

button.

8 Position the touch probe near the second touch point

on the same side.

8 To probe the workpiece, press the machine START

button.

8 Datum: Enter both coordinates of the datum in the

menu window, confirm with the SET DATUM soft

key, or write the values to a table (see “Writing the

measured values from touch probe cycles in datum

tables,” page 27, or see “Writing the measured

values from touch probe cycles in the preset table,”

page 28).

8 To terminate the probe function, press the END key.

X=?

Y=?

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 164 165

No comments

Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles User Manual Page 35