Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles User Manual download pdf (Page 121)

HEIDENHAIN TNC 320 121

3.3 Automatic Workpiece Measurement

8 Center in 1st axis Q273 (absolute value): Center of

the pocket in the reference axis of the working plane.

8 Center in 2nd axis Q274 (absolute value): Center of

the pocket in the minor axis of the working plane.

8 First side length Q282: pocket length, parallel to

the reference axis of the working plane.

8 Second side length Q283: pocket length, parallel to

the secondary axis of the working plane.

8 Measuring height in the touch probe axis Q261

(absolute): Coordinate of the ball tip center (= touch

point) in the touch probe axis in which the

measurement is to be made.

8 Setup clearance Q320 (incremental): Additional

distance between measuring point and ball tip. Q320

is added to column SET_UP.

8 Clearance height Q260 (absolute): Coordinate in the

touch probe axis at which no collision between tool

and workpiece (fixtures) can occur.

8 Traversing to clearance height Q301: Definition of

how the touch probe is to move between the

measuring points:

0: Move at measuring height between measuring

points

1: Move at clearance height between measuring

points

8 Max. size limit 1st side length Q284: Maximum

permissible length of the pocket.

8 Min. size limit 1st side length Q285: Minimum

permissible length of the pocket.

8 Max. size limit 2nd side length Q286: Maximum

permissible width of the pocket.

8 Min. size limit 2nd side length Q287: Minimum

permissible width of the pocket.

8 Tolerance value for center 1st axis Q279:

Permissible position deviation in the reference axis of

the working plane.

8 Tolerance value for center 2nd axis Q280:

Permissible position deviation in the minor axis of the

working plane.

Q287

Q285

Q274

±Q280

Q273

±Q279

Q283

Q286

Q282

Q284

Q261

Q260

MP6140

Q320

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 164 165

Comments to this Manuals

No comments

Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles User Manual Page 121

Comments to this Manuals

Related products and manuals for Equipment Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles