Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles User Manual download pdf (Page 89)

HEIDENHAIN TNC 320 89

3.2 Presetting automatically

8 1st measuring point in 1st axis Q263 (absolute):

coordinate of the first touch point in the reference

axis of the working plane.

8 1st measuring point in 2nd axis Q264 (absolute):

coordinate of the first touch point in the minor axis of

the working plane.

8 Spacing in 1st axis Q326 (incremental): Distance

between the first and second measuring points in the

reference axis of the working plane.

8 Spacing in 2nd axis Q327 (incremental): Distance

between third and fourth measuring points in the

minor axis of the working plane.

8 Corner Q308: Number identifying the corner which

the TNC is to set as datum.

8 Measuring height in the touch probe axis Q261

(absolute): Coordinate of the ball tip center (= touch

point) in the touch probe axis in which the

measurement is to be made.

8 Setup clearance Q320 (incremental): Additional

distance between measuring point and ball tip. Q320

is added to column SET_UP.

8 Clearance height Q260 (absolute): Coordinate in the

touch probe axis at which no collision between tool

and workpiece (fixtures) can occur.

8 Traversing to clearance height Q301: Definition of

how the touch probe is to move between the

measuring points:

0: Move at measuring height between measuring

points

1: Move at clearance height between measuring

points

8 Execute basic rotation Q304: Definition of whether

the TNC should compensate workpiece misalignment

with a basic rotation:

0: No basic rotation

1: Basic rotation

Q264

Q263

Q326

Q327

Q308=1 Q308=2

Q308=3

Q308=4

MP6140

Q320

Q261

Q260

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 164 165

Comments to this Manuals

No comments

Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles User Manual Page 89

Comments to this Manuals

Related products and manuals for Equipment Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles