Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles User Manual download pdf (Page 152)

152

4.2 Available Cycles

Overview

You can program the cycles for tool measurement in the Programming

mode of operation via the TOUCH PROBE key. The following cycles

are available:

Differences between Cycles 31 to 33 and Cycles

481 to 483

The features and the operating sequences are absolutely identical.

There are only two differences between Cycles 31 to 33 and

Cycles 481 to 483:

 Cycles 481 to 483 are also available in TNCs for ISO programming

under G481 to G483.

 Instead of a selectable parameter for the status of the

measurement, the new cycles use the fixed parameter Q199.

Cycle Old format New format

Calibrating the TT

Measuring the tool length

Measuring the tool radius

Measuring tool length and

radius

The measuring cycles can be used only when the central

tool file TOOL.T is active.

Before working with the measuring cycles, you must first

enter all the required data into the central tool file and call

the tool to be measured with TOOL CALL.

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 164 165

No comments

Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles User Manual Page 152