Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles User Manual download pdf (Page 33)

HEIDENHAIN TNC 320 33

2.3 Compensating Workpiece Misalignment

Saving the basic rotation in the preset table

8 After the probing process, enter the preset number in which the

TNC is to save the active basic rotation in the Number in table:

input box.

8 Press the ENTRY IN PRESET TABLE soft key to save the basic

rotation in the preset table.

Displaying a basic rotation

The angle of the basic rotation appears after ROTATION ANGLE

whenever PROBING ROT is selected. The TNC also displays the

rotation angle in the additional status display (STATUS POS.).

In the status display a symbol is shown for a basic rotation whenever

the TNC is moving the axes according to a basic rotation.

To cancel a basic rotation

8 Select the probe function by pressing the PROBING ROT soft key.

8 Enter rotation range 0, confirm with SET BASIC ROTATION soft key

8 Terminate the probe function by pressing the END soft key

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 164 165

No comments

Heidenhain TNC 320 (340 55x-03) Touch Probe Cycles User Manual Page 33