88
1.15 TURN PLUS: XY Plane Contours
XY plane: Single surface
This function defines a single surface in the XY plane.
XY plane: Centric polygon
This function defines polygonal surfaces in the XY plane.
Parameters
Ki Depth (of material to be milled)
K Residual depth (remaining material)
B Width (reference: reference edge Z)
B<0: Surface in negative Z direction
B>0: Surface in positive Z direction
Parameters
Q Number of sides (Q >= 2)
K Width across flats (inscribed circle diameter)
Ki Edge length
B Width (reference: reference edge Z)
B<0: Surface in negative Z direction
B>0: Surface in positive Z direction
Comments to this Manuals