Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes User Manual download pdf (Page 69)

HEIDENHAIN CNC PILOT 4290 69

1.12 Simulation

Displaying the coordinate system

The simulation can show the shifted/rotated coordinate system in the

“lathe window,” if required. To use this feature, you need to stop the

simulation.

U Press the Continue key. The simulation displays the

current coordinate system.

The coordinate system disappears when the next command is

simulated or when you press Continue once again.

Position display with the B and Y axes

The following boxes of the display cannot be edited:

 N: Block number of the NC source block

 X, Z, C: Position values (actual values)

The other boxes can be set with the PgUp / PgDown keys or with the

“Set > Status line” menu:

 Default settings (values of the selected slide):

 Y: Position value (actual value)

 T: Tool data with turret pocket, magazine pocket (in “(..)”) and ID

number

 Technology data settings:

 Speed

 Feed rate

 Direction of spindle rotation

 B axis settings:

 B: Tilt angle of the B axis

 G16/B: Angle of the tilted plane

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 118 119

No comments

Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes User Manual Page 69