Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes User Manual download pdf (Page 11)

HEIDENHAIN CNC PILOT 4290 11

1.2 Manual Control and Automatic Modes

1.2 Manual Control and Automatic

Modes

Automatic mode without reference run

As of software version 625 952-02:

You can start magazine programs and manual programs even if you

have not traversed the reference marks in all the axes. To use this

function, add a comment line to the program you want to start. In this

comment line you define which axes are allowed without a reference

status.

Syntax of the comment line:

 [@0nn]—where nn stands for the address letters of the non-

referenced axes

Examples:

 [@0B]—the B axis does not have to be referenced

 [@0BY]—the B and Y axes do not have to be referenced

Magazine list

The magazine list indicates the current assignment of the tool

magazine. When setting up the magazine list, you assign each tool a

specific magazine pocket by entering the tool's ID number. For a

multipoint tool, you can enter the ID number of any cutting edge of

the tool. From that ID number, the CNC PILOT determines all other

cutting edges of the multipoint tool, since all ID numbers of a

multipoint tool are interlinked in the tool database.

The tool magazine can be set up in different ways:

 Adding tools to the magazine by using the loading hatch: see

“Adding tools to the magazine by using the loading hatch” on

page 12

 Adding tools to the magazine from the machine working space:

see “Adding tools to the magazine from the machine working

space” on page 13

 Removing tools from the magazine: see “Removing tools from

the magazine” on page 13

The functions for setting up the tool magazine and for

inserting the magazine tools are interfaced to the CNC

PILOT and the machine by the machine tool builder. The

functionality provided on your machine may therefore

differ from the functions described in this manual. Your

machine manual provides more detailed information.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 118 119

No comments

Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes User Manual Page 11