Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes User Manual download pdf (Page 71)

HEIDENHAIN CNC PILOT 4290 71

1.14 TURN PLUS: Y Axis

Y axis - Basics

TURN PLUS supports the definition of milling contours and holes and

creates working plans for milling and drilling with the Y axis.

Milling contours / holes: Milling contours are considered to be

figures (slots, rectangles, etc.), linear or circular patterns, or “free”

contours that you have defined. Holes are considered to be individual

holes or hole patterns.

Milling, drilling and boring operations: TURN PLUS supports

milling, drilling and boring in the IWG (Interactive Working plan

Generation) and AWG (Automatic Working plan Generation).

Before you use the AWG, assign machining attributes to the contour

(see User's Manual). With the familiar methods offered by TURN

PLUS, you can determine the sequence of milling operations, the use

of tools, etc.

The AWG can only be used for slides that have no B axis.

If a slide with a B axis has been declared in the program

head, automatic working plan generation is not possible.

Note on data input: When working with hierarchical

milling contours (pocket inside pocket, holes/figures on a

surface, etc.), you can use the up/down cursor keys to

select among all the contours provided on the hierarchy

level of a “workpiece surface.” With the right/left cursor

keys you can select among the milling contours of a

hierarchy level.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 118 119

No comments

Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes User Manual Page 71