HEIDENHAIN CNC PILOT 4290 109
1.17 Example Programs
Machining with the B axis
The following NC program mills first a “surface” (tilted plane) and then
a pocket in the tilted plane. It subsequently drills holes inside the
pocket.
In this example, the tilted plane will be milled by programming single
commands. In the contour definition, however, this single surface is
defined. In this way, you can define the figures and holes with
reference to the tilted plane. Another advantage is that the surface is
displayed in the simulation.
Example: “B axis [DOKBSP1.NC]”
PROGRAMMKOPF [PROGRAM HEAD]
#DATE 01.03.07
#MATERIAL ST 60-2 [MATERIAL]
#SCHLITTEN $1 [SLIDE]
#SYNCHRO 0
SCHEIBENMAGAZIN [PLATE MAGZN.]
ID"B_112-80-0.8"
ID"B_512-600.10"
ID"B_322-1000.10"
ID"B_332-0500.10"
ID"372-600.10"
ID"B_522-6000.1"
ROHTEIL [WORKPIECE BLANK]
N 1 G20 X120 Z120 K1
FERTIGTEIL [FINISHED PART]
N 2 G0 X0 Z-118
N 3 G1 Z0
N 4 G1 X100 B-1
N 5 G1 Z-80 B2
N 6 G1 X118 B-1
N 7 G1 Z-118 B-1
N 8 G1 X0
Comments to this Manuals