Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes User Manual download pdf (Page 40)

1.7 DIN PLUS: Working Planes

When programming drilling or milling operations with the Y axis, you

need to define the working plane.

If no working plane is programmed, the CNC PILOT assumes a turning

operation or a milling operation with the C axis (G18 XZ plane).

As of software version 625 952-05: At the end of a machining program

(M30, M99) the working plane is reset to G18.

G17 XY plane (front or back)

Milling cycles are executed in the XY plane, with the depth feed for

milling and drilling cycles in the Z direction.

G18 XZ plane (turning)

In the XZ plane, “normal turning operations” as well as drilling and

milling operations are executed with the C axis.

G19 YZ plane (side view/surface)

Milling cycles are executed in the YZ plane, with the depth feed for

milling and drilling cycles in the X direction.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 118 119

No comments

Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes User Manual Page 40