HEIDENHAIN CNC PILOT 4290 31
1.5 DIN PLUS: Contours in the XY Plane
Single surface G376 Geo
G376 defines a surface in the XY plane.
Centric polygon G477 Geo
G477 defines polygonal surfaces in the XY plane.
Parameters
Z Reference edge (default: “Z” from section code)
K Residual depth
Ki Depth
B Width (reference: reference edge Z)
B<0: Surface in negative Z direction
B>0: Surface in positive Z direction
I Surface diameter
No entry: “X” from section code
“I” overwrites “X” from section code
C Angular position of surface (default: “C” from section code)
Whether the surface lies on the front face or rear side
has no effect on the evaluation of the algebraic sign for
“width B.”
Parameters
Z Reference edge (default: “Z” from section code)
K Inside diameter (width across flats)
Ki Length of side
B Width (reference: reference edge Z)
B<0: Surface in negative Z direction
B>0: Surface in positive Z direction
Q Number of sides (Q >= 2)
I Surface diameter
No entry: “X” from section code
“I” overwrites “X” from section code
C Angular position of surface (default: “C” from section code)
Whether the surface lies on the front face or rear side
has no effect on the evaluation of the algebraic sign for
“width B.”
Comments to this Manuals