Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes User Manual download pdf (Page 42)

1.8 DIN PLUS (Y Axis): Positioning Commands

1.8 DIN PLUS (Y Axis): Positioning

Commands

Rapid traverse G0

G0 moves the tool at rapid traverse along the shortest path to the

target point X, Y, Z and tilts the B axis.

Approach tool change point G14

G14 moves the slide at rapid traverse to the tool change position. In

setup mode, define permanent coordinates for the tool change

position.

Z

Parameters

X Diameter—target point

Z Length—target point

Y Length—target point

B Angle of the B axis

Programming X, Y, Z, B: Absolute, incremental or modal

Parameters

Q Sequence (default: 0)

 0: Move simultaneously in X and Z axes (diagonal path)

 1: First X, then Z direction

 2: First Z, then X direction

 3: Only X direction, Z remains unchanged

 4: Only Z direction, X remains unchanged

 5: Y direction only

 6: Move simultaneously in X, Y and Z axes (diagonal path)

If Q=0 to 4, the Y axis does not move.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 118 119

No comments

Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes User Manual Page 42