Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes User Manual download pdf (Page 55)

HEIDENHAIN CNC PILOT 4290 55

1.11 DIN PLUS (Y Axis): Milling Cycles

Centric polygon milling—finishing G844

G844 finishes centric polygons defined with G477 Geo (XY plane) or

with G487 Geo (YZ plane). The cycle mills from the outside toward the

inside. The tool moves to the working plane outside of the workpiece

material.

Parameters

NS Block number—reference to the contour description

H Cutting direction for side finishing (default: 0)

 H=0: Up-cut milling

 H=1: Climb milling

P (Maximum) milling depth (infeed in the working plane)

U (Minimum) overlap factor. Defines the overlap of milling paths

(default: 0.5).

Overlap = U*milling diameter

V Overrun factor. Defines the distance by which the tool should

pass the outside radius of the workpiece (default: 0.5).

Overrun = V*milling diameter

F Feed rate for infeed (default: active feed rate)

J Retraction plane (default: back to starting position)

 XY plane: Retraction position in Z direction

 YZ plane: Retraction position in X direction (diameter)

Cycle run

1 Starting position (X, Y, Z, C) is the position before the cycle

begins.

2 Calculate the proportioning of cuts (infeeds to the milling planes,

infeeds in the milling depths) and the spindle positions.

3 Spindle turns to the first position. The tool moves to the safety

clearance and plunges to the first milling depth.

4 Mill the first plane.

5 Retract by the safety clearance, return and cut to the next milling

depth.

6 Repeat steps 4 and 5 until the complete area is milled.

7 The tool returns to “retraction plane J.” The spindle turns to the

next position. The tool moves to the safety clearance and plunges

to the first milling depth.

8 Repeat steps 4 to 7 until all polygonal surfaces are milled.

9 Return to “retraction plane J.”

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 118 119

No comments

Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes User Manual Page 55