Heidenhain MANUALplus 4110 User Manual download pdf (Page 146)

100

101

146 4 Cycle Programming

4.5 Recessing cycles

Recess turning, radial/axial—Expanded

Call the recessing menu.

Select the "Recess turning" cycle.

Select the "Recess turning, radial" cycle (see figures

at right).

Select "Recess turning, axial" (see figures on the

following page).

Press the Expanded soft key.

The cycle machines the area defined by X/Z1 and X2, Z2, taking the

oversizes into account (see also “Recess turning” on page 143).

Cycle parameters

 X, Z starting point

 X1, Z1 contour starting point

 X2, Z2 contour end point

 P infeed depth: Maximum infeed depth

 O recessing feed rate—default: Active feed rate

 A starting angle: Range: 0° <= A < 90°

 W end angle: Range: 0° <= W < 90°

 R rounding

 B1, B2 chamfer/rounding (B1 contour start; B2 contour end)

 B>0: Radius of rounding

 B<0: Width of chamfer

 T tool number

 S spindle speed / cutting speed

 F feed per revolution

 B offset width—default: 0

 U unidirectional turning—default: 0

 U=0: bidirectional

 U=1: unidirectional (direction: see graphic support window)

 I, K oversize X, Z

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 549 550

Comments to this Manuals

No comments

Heidenhain MANUALplus 4110 User Manual Page 146

Comments to this Manuals

Related products and manuals for Equipment Heidenhain MANUALplus 4110