Heidenhain MANUALplus 4110 User Manual download pdf (Page 137)

100

101

HEIDENHAIN MANUALplus 4110 137

4.5 Recessing cycles

Recessing radial/axial, finishing—Expanded

Call the recessing menu.

Select the "Recessing, radial" cycle (see figures at

right).

Select "Recessing axial" (see figures on the following

page).

Press the Expanded soft key.

Press the Finishing run soft key.

The cycle machines the number of recesses defined in Q. The

parameters X/Z to X2/Z2 define the first recess (position, recess depth

and recess width).

Cycle parameters

 X, Z starting point

 X1, Z1 contour starting point

 X2, Z2 contour end point

 A starting angle: Range: 0° <= A < 90°

 W end angle: Range: 0° <= W < 90°

 R rounding

 B1, B2 chamfer/rounding (B1 contour start; B2 contour end)

 B>0: Radius of rounding

 B<0: Width of chamfer

 T tool number

 S spindle speed / cutting speed

 F feed per revolution

 DX, DZ distance to subsequent recess with respect to the

preceding recess

 Q number of recess cycles—default: 1

By setting the following optional parameters, you can define

additional contour elements:

 A: Oblique cut at contour start

 W: Oblique cut at contour end

 R: Rounding (in both corners of the contour valley)

 B1: Chamfer/Rounding at contour start

 B2: Chamfer/Rounding at contour end

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 549 550

Comments to this Manuals

No comments

Heidenhain MANUALplus 4110 User Manual Page 137

Comments to this Manuals

Related products and manuals for Equipment Heidenhain MANUALplus 4110