Heidenhain ND 780 User Manual download pdf (Page 147)

ND 780 23

I - 2 General Operations for ND 780

Data Input Forms

Information required for various operational functions and setup

parameters are entered through a data input form. These forms will

appear after selecting features that require any additional information.

Each form provides specific fields for entering the required

information.

Changes must be confirmed by pressing the ENTER key for them to

become effective. If you do not want to save your changes, press the

C key to return to the previous screen without saving changes.

In some cases such as the Tool Table, the C key is used in place of the

ENTER key.

Instruction Box messages

Whenever a Menu, or Form is opened, an instruction box will also

open immediately to the right of it. This message box will provide

information for what the chosen function does, and present

instructions for available options.

Error Messages

If an error occurs while working with the ND 780, the message will

appear on the display, and provide an explanation of what caused the

error. See "Error Messages" on page 113

To clear the error message:

 Press the C key.

If this message is received:

 Turn off the ND 780.

 Wait approximately 10 seconds, then turn the ND 780 on.

 Error message will be cleared, and normal operation can be

continued.

Critical error message: Interrupts not running.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 246 247

No comments

Heidenhain ND 780 User Manual Page 147