Heidenhain TNC 310 (286 140) Pilot User Manual download pdf (Page 54)

Cycles for Coordinate Transformations

SCALING (11)

CYCL DEF: Select Cycle 11 SCALING

Enter the scaling factor (SCL):

 Input range 0.000001 to 99.999999:

To reduce the contour ... SCL < 1

To enlarge the contour ... SCL > 1

To cancel the SCALING, re-enter the cycle definition with SCL1.

11 CALL LBL1

12 CYCL DEF 7.0 DATUM SHIFT

13 CYCL DEF 7.1 X+60

14 CYCL DEF 7.2 Y+40

15 CYCL DEF 11.0 SCALING

16 CYCL DEF 11.1 SCL 0.75

17 CALL LBL1

SCALING can be effective in the working plane only or in all

three main axes (depending on machine parameter 7410)!

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

No comments

Heidenhain TNC 310 (286 140) Pilot User Manual Page 54